Please wait ...

Tower Bridge, London

  • Author : Spenowr
  • Category : Miscellaneous
User Rating

An Overview

 The bridge crosses the River Thames close to the Tower of London, Tower Bridge is a combined bascule and suspension bridge in London, built between 1886 and 1894. Tower Bridge is one of five London bridges owned and maintained by the Bridge House Estates, a charitable trust overseen by the City of London Corporation. It is the only one of the trust's bridges not to connect the City of London directly to the Southwark bank, as its northern landfall is in Tower Hamlets.

Image result for tower bridge images

The bridge consists of two bridge towers tied together at the upper level by two horizontal walkways, designed to withstand the horizontal tension forces imposed by the suspended sections of the bridge on the landward sides of the towers. The vertical components of the forces in the suspended sections and the vertical reactions of the two walkways are carried by the two robust towers. The bascule pivots and operating machinery are housed in the base of each tower. Before its restoration in the 2010s, the bridge's colour scheme dated from 1977, when it was painted red, white and blue for Queen Elizabeth II's Silver Jubilee. Its colours were subsequently restored to blue and white. 

Image result for tower bridge images

The bridge deck is freely accessible to both vehicles and pedestrians, whereas the bridge's twin towers, high-level walkways and Victorian engine rooms form part of the Tower Bridge Exhibition, for which an admission charge is made. The nearest London Underground tube stations are Tower Hill on the Circle and District lines, London Bridge on the Jubilee and Northern lines and Bermondsey on the Jubilee line, and the nearest Docklands Light Railway station is Tower Gateway. The nearest National Rail stations are at Fenchurch Street and London Bridge.

 

Construction

 Construction of the bridge started in 1886 and took eight years with five major contractors and employed 432 construction workers. Two massive piers, containing over 70,000 tons of concrete, were sunk into the riverbed to support the construction. More than 11,000 tons of steel were used in the framework for the towers and walkways, which were then clad in Cornish granite and Portland stone, to protect the underlying steelwork. The total cost of construction was £1,184,000 (equivalent to £132 million in 2018).

Image result for construction of tower bridge london

 

Design & Structure

 The iconic tower bridge is 800 feet (240 m) in length with two towers each 213 feet (65 m) high, built on piers. The central span of 200 feet (61 m) between the towers is split into two equal bascules or leaves, which can be raised to an angle of 86 degrees to allow river traffic to pass. The bascules, weighing over 1,000 tons each, are counterbalanced to minimize the force required and allow raising in five minutes.

Image result for design of the towers inside of the tower bridge

The two side-spans are suspension bridges, each 270 feet (82 m) long, with the suspension rods anchored both at the abutments and through rods contained within the bridge's upper walkways. The pedestrian walkways are 143 feet (44 m) above the river at high tide, and accessed by lifts. 

The main bridge deck carries two lanes of road traffic between two low-level pedestrian walkways across both suspension spans and the opening bascule section of the bridge, with the walkways separated from the roadway by fences. The roadway passes through each of the two towers, whereas the low-level walkways pass around the outside of the towers.

 

Hydraulic System

 The original raising mechanism was powered by pressurised water stored in several hydraulic accumulators.  Water, at a pressure of 750 psi (5.2 MPa), was pumped into the accumulators by two 360 hp (270 kW) horizontal twin-tandem compound stationary steam engines, fitted with Meyer expansion slide valves. Each engine drove a force pump from its piston tail rod. The accumulators each comprise a 20-inch (51 cm) ram on which sits a very heavy weight to maintain the desired pressure.

Image result for hydraulic system of tower bridge

In 1974, the original operating mechanism was largely replaced by a new electro-hydraulic drive system. The only components of the original system still in use are the final pinions, which engage with the racks fitted to the bascules. These are driven by modern hydraulic motors and gearing, using oil rather than water as the hydraulic fluid. Some of the original hydraulic machinery has been retained, although it is no longer in use. It is open to the public and forms the basis for the bridge's museum, which resides in the old engine rooms on the south side of the bridge. The museum includes the steam engines, two of the accumulators and one of the hydraulic engines that moved the bascules, along with other related artefacts.

 

Signalling and Controls

 To control the passage of river traffic through the bridge, a number of different rules and signals were employed. Daytime control was provided by red semaphore signals, mounted on small control cabins on either end of both bridge piers. At night, coloured lights were used, in either direction, on both piers: two red lights to show that the bridge was closed, and two green to show that it was open. In foggy weather, a gong was sounded as well. 

Image result for signalling and controls of tower bridge

Vessels passing through the bridge had to display signals too: by day, a black ball at least 2 feet (0.61 m) in diameter was to be mounted high up where it could be seen; by night, two red lights in the same position. Foggy weather required repeated blasts from the ship's steam whistle.

 

Trends

 The Tower Bridge Exhibition is a display housed in the bridge's twin towers, the high-level walkways and the Victorian engine rooms. It uses films, photos and interactive displays to explain why and how Tower Bridge was built. Visitors can access the original steam engines that once powered the bridge bascules, housed in a building close to the south end of the bridge. 

Image result for movies at tower bridge

The exhibition charges an admission fee. Entrance is from the west side of the bridge deck to the northern tower, from where visitors ascend to level 4 by lift before crossing the high-level walkways to the southern tower. In the towers and walkways is an exhibition on the history of the bridge. The walkways also provide views over the city, the Tower of London and the Pool of London, and include a glass-floored section. From the south tower, visitors can visit the engine rooms, with the original steam engines, which are situated in a separate building beside the southern approach to the bridge.

Image result for exhibition at tower bridge

Recent Reviews

No Reviews

Add Review

You can add Upto 250 Characters



Yes No